The Life Blood of the OptiCool Solution
Fundamentally, cooling the computer equipment in a data center is about moving heat energy most efficiently. Some data centers use air and some use water, but the OptiCool system uses R134a, a non-toxic, synthetic refrigerant. R134a has superb thermodynamic properties, which make it an ideal medium for moving heat. For a given volume, water can absorb 3,400 times more heat than air. In comparison, R134a can absorb nine times more heat than water making it the lifeblood of OptiCool’s cooling solution.
Refrigerant Delivery Network (RDN)
The RDN is composed of refrigerant-grade copper piping, factory-built refrigerant distribution segments, and flexible stainless-steel hose pairs. Self-sealing quick-connect couplers join the AHX cooling units with the supply and return lines. The quick-connect feature allows for modularity, flexibility, and reduced on-site installation times.
Refrigerant Pump Systems (RPS)
The RPS circulates refrigerant to the Active Heat Extractors. The pump includes a chilled-water heat exchanger to remove heat from the refrigerant. When chilled water is not available, we use outdoor condensers to reject heat. Virgin R-134a refrigerant is circulated at low pressure with no compression so no oils are used. Refrigerant temperature is strictly maintained to prevent condensation. There are multiple pump models to support various power input arrangements and outdoor environmental conditions.
High Capacity Pump Spec Sheets
Chilled Water Heat Rejection
DX Heat Rejection
Compact MiniPump Spec Sheets
Active Heat Extractor (AHX)
The AHX is the cooling unit installed inside the door. Each consists of an evaporator coil and two fan units. The fan draws hot exhaust through the coil, causing the pumped refrigerant to undergo a phase change, thereby removing the heat. Each unit consists of two variable-speed fans for efficiency and redundancy. Cooling units can be removed or installed without disruption to service.
AHXs are available in 10kW and 20kW heat removal configurations.
Cool Door System (CDS)
The CDS offers a unique modular mounting system which can accommodate up to 3 AHX units per door. The CDS is mounted on the back of the cabinet and removes heat from the exhaust air.
The CDS offers a unique modular mounting system that can accommodate up to 3 AHX units per door. The CDS is mounted on the back of the cabinet and removes heat from the exhaust air. The doors are designed to allow full and convenient access to IT equipment. The CDS is lightweight and available in standard cabinet sizes. In addition, many cabinet manufacturers offer “OptiCool Ready” products that use existing mounting points.
For retrofits, OptiCool’s door transition kits provide convenient and seamless integration of the Cool Door System on to all major manufacturer’s cabinets. Doors can be configured to handle heat removal from 3kW up to 60kW per rack.
Cool Row System (CRS)
For Horizontal Heat Capture Applications
Use CRS for Horizontal Cooling Applications such as UPS, Cabinet Top Exhaust, Mechanical Rooms, and Hot Aisle Requiring Heat Capture.
- 24” or 30” Plenum Width
- Supports 2 or 3 AHX
- Top or Bottom Inlet
- Top of Cabinet or Ceiling mount
- Single or Dual Power
A Comprehensive Solution
Our impressive cooling components are just part of the OptiCool solution.
Providing unparalleled service and support are also integral to our mission. Our team
is committed to the highest levels of customer success and satisfaction.
Be a part of the next generation in data center cooling. Contact OptiCool today to
receive a no-cost Data Center Energy Assessment, including a comparative ROI.
See how you can reduce energy usage and carbon emissions by up to 90%!
Ready to take a quantum leap forward in data center design and cooling? Please contact us today at 585-347-6142 to schedule a free assessment.